Radiolink AT10II 12CH Transmitter With R12DS Receiver Radiolink AT10II 12CH Transmitter With R12DS Receiver is the first drone remote controller to make DSSS and FHSS work synchronously. 16 channels, pseudo random frequency hopping. QPSK modulation ensures excellent anti-interference performance. It can even control stability in city environments. To watch more about our products, please visit our YouTube Channel Radiolink AT10II With R12DS Receiver Description Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz) Modulation mode: QPSK Control distance: up to 4 km Compatible model: all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multirotor Screen: 3.5 inches 16 colorful screens, 320*480 pixels Radiolink AT10II 12CH Features Twelve channels (5 through 12 programmable by user) Username and model setup can be saved (up to 15 aircraft) RSSI and Telemetry Transmitter output greater than 100mW Operating voltage 7.4 to 15.0v, amperage <105mA Adjustable display brightness and contrast Multiple alarms Fail Safe system: engages when a clean signal is lost or if the receiver battery is low Servo reversing Servo end-point adjustment Adjustable servo travel limit (prevents push rod jamming) Servo Cycle function helps locate servo problems Adjustable gimbal-stick length and tension Dual, Triple and Exponential rates Digitally controlled Trim switches Sub-Trim program changes the servo neutral position Compatible relievers: R12DS (Std pack), R12DSM, R9DS, R6DS and R6DSM Specifications of this drone remote controller Size: AT10II-180*95*220 mm, R12DS-50*32*15 mm Weight; 0.95 kg Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz) Modulation mode; QPSK Channel bandwidth; 5.0 MHz Spread spectrum: DSSS&FHSS Adjacent channel rejection: >38dbm Transmitter power; <100mW (20dbm ) Operating current; <105mA Operating voltage: 7.4-15.0V Control distance: up to 4 km, the actual control distance depends on the flying environment Channel; 12 channels, 5-12 channels are customized Compatible model: all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multirotor Simulator mode: under the simulator mode the transmitter action turns off, changes to power saving mode Screen: 3.5 inches 16 colorful screens, 320*480 pixels Support receivers: sells with R12DS (SBUS&PWM), compatible with R6DS,R6DSM,R9DS,R12DS Dsss and fhss spread spectrum More stabilized, faster Low consumption of battery Two signal working mode of R12DS: (1)PWM signal output working mode: red LED indicates PWM signal output, 11 channels Totally. (2) S-BUS signal output working mode: blue/purple LED indicates S-BUS signal output, 12 channels totally. S-BUS and PWM signal working at the same time. S-BUS signal channel(3 pin of row 11) output 12 channels S-BUS signal, PWM signal channels(3 pin of row 1 to row 10) output CH3 to CH12 PWM signals, but 12 channel in total. How many PWM signal channels you can use depends on how many S-BUS signal channels you have used(e.g: you have use 4 S-BUS signal channels, then you have 8 PWM signal channels to use). How to match code with transmitter: 1. Put the transmitter and the receiver close to each other within 1 meter. 2. Turn on the transmitter, then power on the R12DS. 3. Connect CH3 of R12DS to ESC. 4. There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal Always LED on. Specification Of the AT10II Transmitter: Frequency 2.4GHz ISM band(2400MHz to 2485MHz) Modulation Mode QPSK Channel Bandwidth 5.0MHz Spread Spectrum DSSS,FHSS Adjacent Channel Rejection >38dBM Transmitter Power <100mW(PCB testing), <20dBm(3 meter air testing) Operating Current <95mA Operating Voltage 8.6~15V Control Distance 800 meters ground Channel 10 Channel Simulator Mode Under the simulator model the transmitter action turn off, change to power saving model Screen 16 colorful screens Size 78 x 52 mm 320*480 pixel Compatible Model Include all 120 degree and 90 degree swash plate helicopter, all fix wing and gliders, five flying models. Size 18 x 9.5 x 22 cm Weight 0.95 kg Specification Of R12DS Receiver: Frequency 2.4GHz Channel 12CH,support SBUS and PWM signal output Working Voltage 4.8-10V Working Current 38-45mA (input voltage: 5V) Dimension 50×31.5×14.5 mm Weight 14g Control Range About 4KM air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations). Note: The Radiolink AT10II transmitter is NOT compatible with R10D receiver. Radiolink AT10II User Manual here
