Holybro Pix32 v6 Standard Set (Discontinued) The Pix32 v6 is the latest update to the pix32 v5 flight controllers. It is a variant of the Pixhawk 6C. It is comprised of a separate flight controller and carrier board which are connected by a 100 pin connector. It is designed for those pilots who need a high power, flexible and customizable flight control system. Inside the Pix32 v6, you can find an STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications. The Pix32 v6’s H7 microcontroller contain the Arm® Cortex®-M7 core running up to 480 MHz, has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. It includes high-performance, low-noise IMUs on board, designed to be cost effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. This flight controller is perfect for people that is looking for a affordable and modular flight controller that can use a customized baseboard. We have made the pix32 v6 base board schematics public, you can either make a custom carrier board yourself or just let us help you with it. By using a customize baseboard, you can make sure that the physical size, pinouts and power distribution requirements match your vehicle perfectly, ensuring that you have all the connections you need and none of the expense and bulk of connectors you don’t. Follow us World Drone Market on our YouTube to view more about the Holybro Pix32 v6 Standard Set. Key Design Points: High performance STM32H743 Processor with more computing power & RAM New cost-effective design with low-profile form factor Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs Holybro Pix32 v6 Standard Set Specifications Processors & Sensors FMU Processor: STM32H743 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM IO Processor: STM32F103 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM On-board sensors Accel/Gyro: ICM-42688-P Accel/Gyro: BMI055 Mag: IST8310 Barometer: MS5611 Electrical data Voltage Ratings: Max input voltage: 6V USB Power Input: 4.75~5.25V Servo Rail Input: 0~36V Current Ratings: Telem1 Max output current limiter: 1.5A All other port combined output current limiter: 1.5A Mechanical data FC Module Connector Type: Panasonic-AXK5S-6S Dimensions: N/A Weight: N/A Interfaces 16- PWM servo outputs (8 from IO, 8 from FMU) 3 general purpose serial ports Telem1 – Full flow control, separate 1.5A current limit Telem2 – Full flow control Telem3 2 GPS ports GPS1 – Full GPS port (GPS plus safety switch) GPS2 – Basic GPS port 1 I2C port Supports dedicated I2C calibration EEPROM located on sensor module 2 CAN Buses 2 Debug port FMU Debug I/O Debug Dedicated R/C input for Spektrum / DSM and S.BUS, CPPM, analog / PWM RSSI Dedicated S.BUS output 2 Power input ports (Analog)
