Holybro PM06 V2 Power Module 14S Version Description: Holybro PM06 V2 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated power distribution for 4 ESCs. It comes with pre-soldered wires, capacitor, and XT60 connector. Follow us World Drone Market on YouTube to view more videos about the Holybro Product. Specifications： Input voltage (10S version): 2S-10S Input voltage (14S version): 2S-14S PCB Cont. Current Rating: 70A PCB Burst Current Rating: 120A (<60 Sec) Output: DC 5.2V & 3A Max Ouput Max Power : 18W Voltage Divider: 18.182 Amperes per Volt: 36.364 Please Note: The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Mechanical Specification: Dimensions: 35x35x5mm Mounting hole: 30.5mm*30.5mm Weight: 24g Pin Map:
