Mateksys Flight Controller F405-VTOL

Mateksys Flight Controller F405-VTOL Mateksys flight controller F405-VTOL is a flight controller specially designed for vertical take-off and landing (VTOL) aircraft. Manufactured by Mateksys, it uses modern flight controller technology and can be used in a variety of vertical take-off and landing aircraft, such as fixed-wing aircraft, multi-rotor aircraft and vertical take-off and landing aircraft. Mateksys flight controller F405-VTOL has powerful processing capability and rich functions. It uses the STM32F405 processor with a high-performance ARM Cortex-M4 core for fast data processing and precise flight control. In addition, it is equipped with a wealth of sensors including accelerometer, gyroscope, compass and barometer to provide accurate posture and position information. Mateksys flight controller F405-VTOL supports multiple flight modes and functions. It can realize attitude stabilization mode, altitude hold mode, position hold mode and waypoint flight mode, etc. At the same time, it also has a customized flight parameter adjustment function, which can be adjusted and optimized according to the needs of users. In addition, the F405-VTOL flight controller also has a wealth of expansion interfaces, which can be used to connect other devices and sensors to achieve more functional expansion, such as GPS modules, lighting, data transmission equipment, etc. In conclusion, the Mateksys flight controller F405-VTOL is a powerful flight controller for aircraft that require vertical take-off and landing capabilities, and provides reliable and precise flight control and navigation functions. The MATEKSYS F405-VTOL Flight Controller features 25×25 and 35×35 mounting patterns and weighs 25g. It features a Barometer, BlackBox MicroSD, 6x UARTS, 4x ADC, 12x PWM outputs, 2x PINIO (Camera switch, P101 pad), PDB for 5x individual ESC/Motors, 6.8-30V DC IN (2-6S LiPo), 220A High-precision current sensor, BEC 5V 2A for FC and peripherals, BEC 9V 2A (12V options for Camera/VTX), BEC VX 8A cont. 10A Peak for servos. Follow us World Drone Market on our YouTube to view more about the Mateksys Flight Controller F405-VTOL You can also directly click on our official website World Drone Market to learn more about the latest products of drones. Features BEC VX 8A cont. 10A Peak for servos (5V,6V,7.2V option) BEC 9V 2A, 12V option for Camera/VTX 2x PINIO (Camera switch, P101 pad) 25×25 and 35×35 mounting patterns 220A High-precision current sense BEC 5V 2A for FC and peripherals PDB for 5x individual ESC/Motors 6.8-30V DC IN (2-6S LiPo) MCU STM32F405RGT6 Barometer SPL06-001 BlackBox MicroSD 12x PWM outputs IMU ICM42688-P OSD AT7456E 6x UARTS 4x ADC Specifications Mounting: 25 x 25 mm-Φ2mm, 35 x 35 mm- Φ4 mm Built in inverter on UART2-RX for SBUS input MCU: STM32F405RGT6, 168MHz , 1MB Flash USB/Beep Extender with Type-C(USB2.0) 6x UARTs, 1x Softserial_Tx option(INAV) 4x ADC (VBAT, Current, RSSI, Airspeed) Weight: 25g w/ USB/buzzer adapter Switchable Dual Camera Input 1x spare PINIOOSD: AT7456E Dimensions: 45 x 42 x 15 mm Blackbox: MicroSD card slot 12x PWM outputs IMU: ICM42688-P Baro: SPL06-001 1x I2C FC Firmware INAV: MATEKF405TE_SD (INAV 5.0 or newer) ArduPilot: MatekF405-TE PDB Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot) Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter Support continuous load of up to 100A on ESC pad near the current sensor resistor Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot) Sense resistor: 100A continuous, 220A peak 5x ESC power pads, total 100A continuous Input voltage range: 6.8~30V (2~6S LiPo) BEC 5V output Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed Continuous current: 2 Amps BEC 9V /12V output For stable 9V/12V output, input voltage should > output voltage 1V Designed for Video Transmitter, Camera, Gimbal ect Continuous current: 2 Amps 12V option with Jumper pad BEC Vx output for stable Vx output, input voltage should > Vx voltage 1V Voltage adjustable, 5V Default, 6V or 7.2V via jumper Continuous current: 8 Amps, 10A Peak Designed for Servos BEC 3.3V output Designed for Baro / Compass module and external 3.3V peripherals Continuous current: 200mA Linear Regulator IMPORTANT NOTES :      Board is shipped unsoldered. Links      Firmware